Welded power grid

Assembly ground column power grid is the structural form of the ground column, the ground column is fixed on the ground by the way of ground embedded plate or chemical anchor bolt, this structural form is mainly for the steel structure of the roof of the workshop without a pre-set lifting point, it will take up a part of the ground space, and will have a certain impact on the logistics conveyance. The steel structure is composed of two parts: the column and the upper net frame. The column is equipped with power box, air source point and fan, etc. The upper net frame is installed with components such as compressed air main pipeline, cable racks, lighting fixtures, spiral electric tubes and spiral air tubes. Inside the power box on each column is set up with power switch, lighting switch, fan switch, etc., which can realize partition control and meet the needs of raw line for power supply (AC3OV, AC220V), air source (compressed air), lighting and working environment improvement (fan). Referring to the domestic mainstream bus manufacturer's requirements, the height of the standing moving column is recommended to be 4.5 meters.

Classification:

Immediately consult:

Product Introduction Related Products

Assembly ground column power grid is the structural form of the ground column, the ground column is fixed on the ground by the way of ground embedded plate or chemical anchor bolt, this structural form is mainly for the steel structure of the roof of the workshop without a pre-set lifting point, it will take up a part of the ground space, and will have a certain impact on the logistics conveyance. The steel structure is composed of two parts: the column and the upper net frame. The column is equipped with power box, air source point and fan, etc. The upper net frame is installed with components such as compressed air main pipeline, cable racks, lighting fixtures, spiral electric tubes and spiral air tubes. Inside the power box on each column is set up with power switch, lighting switch, fan switch, etc., which can realize partition control and meet the needs of raw line for power supply (AC3OV, AC220V), air source (compressed air), lighting and working environment improvement (fan). Referring to the domestic mainstream bus manufacturer's requirements, the height of the standing moving column is recommended to be 4.5 meters.


Remarks: The functional configuration of the frame and the brand of purchased parts can be specified by the demand side. Can be designed and produced according to the requirements of the demand side.

Picture Name

Previous Page


Next Page

Message consultation