12

2022-01

Multi-equipment South Korea modern light truck cab welding line project

Multi-equipment welcomed the delivery of South Korea cab welding line project. This project mainly provides welding line solutions for South Korea Kia light truck cab. Truck cab welding has high technical requirements. Multi-equipment actively formulates and optimizes solutions in combination with the specific needs of customer customization.

2022-01-12

Multi-equipment South Korea modern light truck cab welding line project

11

2022-01

Multi-equipment to Pakistan project inspection

Women's expedition | multi-equipment to Pakistan project inspection Overseas markets have been the focus of the strategic deployment of multi-equipment, in the international epidemic is still serious state, in early November this year, multi-equipment international division manager Fan led the company's technical team, resolutely went to Pakistan to provide customers with equipment installation guidance services. At the same time, manager fan took advantage of this opportunity to fly frequently to and from various cities in Pakistan, and conducted in-depth visits, communication and research with potential customers, laying a good foundation for diversified equipment overseas business in 2022. During this trip to Pakistan, manager fan of the international business department and Karachi's local "faw liberation" agent were the core breakthrough points to understand the potential needs of customers and discuss with customers the overall layout of the automobile production line. At the same time, it conducted research and analysis on the local automobile market, and successively conducted in-depth exchanges with agents such as "Proton Automobile, Haig Bus, Yaxing Bus", etc., providing customers with a large number of solutions in various strategies such as CBU, SKD, CKD, etc. It also made reasonable suggestions for the future transformation of Pakistan's electric vehicle market, which won the unanimous recognition and praise of customers. This exchange between the two parties laid the foundation for the next step of cooperation. It not only has a deeper understanding of the local market and customer conditions, but also further expands the influence of multiple equipment, wins the trust of customers, and improves the overall design of multiple equipment by customers., R & D, manufacturing and service capabilities. Through in-depth exchanges, the two sides have enhanced customers' confidence and trust in diversified equipment, and will further enhance the excellent reputation of diversified equipment in overseas markets. Diversified equipment will continue to be market demand-oriented, with technological innovation as the core, continuously improve product quality and service levels, further meet the new requirements of customers, consolidate brand strength, and enter the international market. Struggle for the cause of automobile intelligent equipment will always be our constant mission. Thank you for your trust and support! More thanks to the diverse people who went to the front line to face the difficulties, you are the most lovely people! Multiple equipment, has been on the road!

2022-01-11

Multi-equipment to Pakistan project inspection

14

2021-09

August heavy truck sales fell 60% year-on-year, light passenger growth 16%

On September 10, China Automobile Industry Association released monthly production and sales data. Data show that in August 2021, automobile production and sales completed 1.725 million and 1.799 million vehicles, respectively, down 7.4 and 3.5 percent month-on-month, down 18.7 and 17.8 percent year-on-year; from January to August 2021, automobile production and sales completed 16.166 million and 16.556 million vehicles, respectively, up 11.9 and 13.7 percent year-on-year, the growth rate continued to slow down from January to July.

2021-09-14

August heavy truck sales fell 60% year-on-year, light passenger growth 16%

06

2021-09

Plane Layout of Body Welding Production Line

As one of the four major processes, the plane layout of the production line is of great significance to the safety and quality of the future production. Composition of body welding production line Body welding production line is the general term of all forming stations of BIW. It is composed of body assembly line and many sub-assembly lines. Each assembly line or sub-assembly line is composed of many welding stations. Each station is composed of many positioning and clamping fixtures and automatic welding devices. The transfer of loading and unloading and parts is realized through electric hoist, robot and other conveying equipment between lines and stations, so as to ensure the continuity of work in each station in the production line. The body welding production line includes: adjustment and grinding line, main welding line, lower line, floor assembly line, side wall assembly line, door cover line and cabin line. Plane layout of welding production line 1. Feasibility analysis of the layout of the welding production line (including the factory building) According to the new model capacity planning and new model product data, determine the process route and production site, through the status of tooling equipment for short-term and long-term production feasibility analysis. 2. Plane layout of welding production line-steel structure According to the product data and the process division of the body planning technology department, the process diagram list is worked out. (1) Confirm the corresponding fixture list and size through the process diagram; (2) Confirm the corresponding equipment list and size through the operation diagram and fixture list; (3) Through the equipment list and fixture list to arrange, confirm the location and quantity requirements of relevant power, water, steam and compressed air and other energy facilities; (4) Confirm the shape (length, height and width) of the on-site steel structure through the equipment list, fixture list, power, water, steam, compressed air and other energy facilities and safety passages, and complete the overall on-site layout. 3. Plane layout of welding production line-inter-process layout According to the operation drawing, fixture and equipment list, make the arrangement between the processes. The formulation principles are as follows: (1) Through the relationship between the upper and lower processes, the mainstream adopts the principle of proximity, according to local conditions. (2) Through the measurement of working hours, the stations in the area with less working hours, no influence on the overall operation, no influence on the beat and less route transfer shall be concentrated as much as possible, and the relevant personnel shall operate under reasonable beat. (3) Confirm the special station equipment of the fixture and the integrated station equipment through the process diagram, and confirm the position of the station equipment through the size of the parts and the way the employees take the parts. (4) Through the measurement of working hours in working stations, the principle of proximity is adopted, and "0" inventory is implemented for working stations with little difference between upper and lower order. (5) Between station processes, when the transfer route has to be relatively long due to pros and cons analysis, the online inventory mode is adopted to make up for it according to the working hours. (6) If there is congestion between processes, it is recommended to disassemble the process steps or disassemble the process to make up for it, reduce the small parts that do not affect the accuracy of the station, move to the next process for welding, and reduce the corresponding station equipment; The sliding mechanism is used to pre-assemble and then slide to the welding station for welding, thus eliminating the interference between the welding tongs and other facilities. 4. Plane layout of welding production line-logistics transfer layout (1) through the actual field measurement and the weight of parts, size, determine the logistics transfer mode between processes. (2) through the actual field practice, the importance of surface quality and the quality of parts, size to determine the logistics transfer between processes. (3) Logistics channel planning, welding logistics channel requirements for 3m. The arrangement of welding logistics is an important link in the arrangement of welding production line. Whether a vehicle type runs smoothly in the later production is very critical to the planning and arrangement of welding logistics. It is necessary to calculate the logistics volume of each channel and see the size of the logistics volume when running at full load. The layout of the logistics of the welding workshop also reflects the level of the welding production line from the side. The success of automobile welding plane layout has laid a good foundation for automobile manufacturing in the future. With the rapid development of the automobile industry, various automobile manufacturers have higher and higher requirements for the plane layout of welding assembly, and they are becoming more and more demanding. In addition to designing the layout in accordance with the principles, specific problems need to be treated concretely.

2021-09-06

Plane Layout of Body Welding Production Line

28

2021-08

Pakistan Project 10 Tons Crane Beam Shipment

On August 18, 2021, the 10-ton crane beam of the Pakistan project was shipped. Due to the long crane beam, it is shipped on deck. At present, the shipment has been completed and will arrive at the customer's port of destination in one month. This project includes bus welding line, bus assembly line and bus inspection line. When the whole line is completed, it will be the second bus super factory in Pakistan.

2021-08-28

Pakistan Project 10 Tons Crane Beam Shipment

17

2021-08

China's electric buses lead the world trend

The "Electric Bus Operation and Maintenance Series Online Course" organized by the International Federation of Public Transport (UITP) opened. Wang Jian, chief scientific communication expert of China's public transport discipline, gave the first lecture on "Electric Solution for Urban Bus System" (Electric Solution For Urban Bus Networks) to more than 40 students from more than 10 countries, introducing the experience of China's electric buses. Wang Jian's wonderful lecture was highly praised by the students: professional and profound! Under the background that most cities and regions around the world begin to take zero emission environment as their development goal, and more and more city authorities and public transport companies are considering providing comprehensive electric solutions for their urban public bus networks, the International Federation of Public Transport (UITP) College and Shenzhen Bus Group jointly launched the "Electric Bus Operation and Maintenance Series Online Course", which was delivered by Wang Jian, chief scientific communication expert of China's public transport discipline, on the afternoon of March 30, 2021, there were 9 online interactive classes in this online course. More than 40 students from more than 10 countries signed up to participate. Zeng Shuyi, Asia Pacific Executive Director of the International Public Transport Federation, and Ma Zhengyuan, Deputy General Manager of Shenzhen Bus Group, gave welcome speeches before the class. More than 40 participants from more than 10 countries The course title of Mr. Wang Jian is "Electric Solution of Urban Bus System". He summarizes the application status and mainstream models of global electric buses from the background of automobile fuel efficiency standard, greenhouse gas emission source and bus emission standard, Paris climate agreement and policies and regulations, etc, then, the deployment phase of bus electrification solution, the overall design method of electric bus technology and the technology selection based on total cost of ownership are discussed. Mr. Wang Jian's wonderful lecture was highly praised by the students: professional and profound! Wang Jian, Chief Science Communication Expert in Public Transport Mr. Wang Jian first introduced the policy background and urban strategy of introducing electric buses. From the Energy Policy and Conservation Act (EPCA), the Clean Air Act, Greenhouse Gas Regulations and Fuel Economy Standards for Heavy-Duty Engines and Vehicles in the United States to the Emission Certification Directive for Non-Road Mobile Machinery in Europe, and China's "Gasoline Vehicle Idle Speed Pollution Emission Standard", "Diesel Vehicle Free Acceleration Smoke Emission Standard", "Comprehensive Air Pollutant Emission Standard" and other related regulations, and then from the perspective of the "Paris Climate Agreement" countries' self-determined expected contribution, It is pointed out that it is an irreversible trend to transform the current transportation system into sustainable energy and sustainable electric travel. The process of electrification of public transport is irreversible Teacher Wang Jian specially introduced the electrification case of Shenzhen Bus Group. It is the world's largest electric bus operator. After 8 years of accumulation, it took the lead in fully realizing bus electrification in 2018. Its electric bus fleet reached 6053 vehicles. Won the "Outstanding Achievement Award" at the 63rd World Public Transport Conference; shenzhen Bus Group's experience in the fields of bus electrification, intelligent dispatching, bus sharing and driverless driving has established an advanced professional image not only for China, but also for the international public transport industry. Mr. Wang Jian also introduced the products on sale of electric buses in the world. BYD and Yutong buses are undoubtedly the most important manufacturers. China's battery electric buses are far ahead in terms of the number of battery electric buses. China's electric buses adopt wheel-side drive technology in large quantities. European manufacturers have also launched electric buses and started demonstration operation. Mr. Wang Jian compared the bus prices in North America, China, Europe, Latin America and other regions, and analyzed the advantages of bus products in each region, all kinds of electric buses made in China are highly competitive in the world, but it remains to be seen who will take the lead in the development of hydrogen fuel electric buses in the future. Finally, Mr. Wang Jian summed up three basic points: first, the introduction of electric buses is the trend of global public transport development; second, the challenges of deploying electric buses are prepaid costs, operational requirements, procurement, cooperation with the energy industry; third, global electric bus products have adapted to the fleet management needs of public transport.

2021-08-17

China's electric buses lead the world trend
< 1...567...18 >

Contact Information

 

Mailbox：info@zzdy.cn

Tel：0371-62138138

Fax：0371-62138138

Address：Automobile Industrial Park, South Section of West Ring Road, Zhongmou County, Zhengzhou, China

Business License

This site already supports IPV6 tags