Product Introduction Related Products

1. station and equipment overall planning:

I. Top cover welding is divided into three work stations:

1.1 Top skin tensioning and fixing station: CO2 welding and fixing one end of the skin; tensioning; CO2 welding and fixing the other end of the skin; the top edge skin and the frame edge longitudinal beam shall be welded by CO2.

Automatic spot welding station for 1.2 top skin: the process trolley lifts the top cover, automatically walks to the welding station, and places the top cover; Automatic spot welding of 2 welds, and the roof is covered.

The skin, top edge skin and top frame are welded together at the same time.

1.3 auxiliary position: repair welding of the top skin, open the air conditioner and roof window hole, and wear the air conditioner and cylinder bolt.

2. equipment characteristic requirements:

The 2.1 adopts double-station equipment: divided into skin tensioning, gluing and spot fixing stations; Large span and small span brake spot welding stations; The total length of the equipment is 33 meters.

After the 2.2 is tensioned and fixed, the top cover is sent to the automatic spot welding station by the process trolley, which is electrically controlled and automatically transported.

2.3 open programming, parameter preset storage fast, easy to call, with memory function.

The large-span (1000mm) spot welding and point-by-point (40-100mm) welding of the 2.4 top skin are automatically completed, and the welding distance can be set by person.

3. time beat:

The beat of the double-station equipment can reach 20 minutes/set, and each shift has 24 sets for 8 hours.

Frame assembly fixture is part of DUOYUAN's work on final assembly lines, subassembly stations and related tooling. The page shows the equipment family and project images. Rated load, speed, material range and cycle time are confirmed in the engineering review for that vehicle and plant. They are not fixed catalog values.

Questions before a technical review

What does a DUOYUAN assembly line cover?
It can cover the assembly process, stations, tooling and transfer between stations. Station count and cycle time are set in line balancing for the specific vehicle.
Are capacity, speed and material range published as fixed specifications?
No. DUOYUAN confirms rated load, line speed, material grade and cycle time during the engineering review. A category page does not state a payload, thickness or tolerance that applies to every project.
What should a buyer send with an inquiry?
Send the vehicle or part, the process step, the target plant and any layout constraints to info@zzdy.cn or call +86-371-62138138. The engineering team replies with the project scope. Do not treat marketing copy on this site as a guaranteed technical parameter.

Related Turnkey Solutions, Equipment & Project Cases:

Final Assembly Line Solution →Automotive Conveying Equipment →American BYD Electric Bus Line →CRRC Commercial Assembly Line → Complete Plant Turnkey EPC → Equipment Specifications →
Roof Skin Robot Spot Welding Workstation

Roof Skin Robot Spot Welding Workstation

Full CNC combined equipment C

Full CNC combined equipment C

Economical CNC combined equipment B

Economical CNC combined equipment B

Page 1 of 17

Message consultation

Submit immediately